| Our Company: |
|
|
| Services: |
|
|
| Links: |
|
|
|
|
AllPro 100Plus Data
SPECIFICATIONS
FILM CAPACITY:
- 138 films/hr. (continuous feed) (17743cm)
PROCESSING TIME:
|
Film length |
17"/43cm |
14"/35cm |
12"/30cm |
10"/24cm |
|
Processing (sec.) |
94 |
94 |
94 |
94 |
|
Feed Time (sec.) |
26 |
22 |
19 |
16 |
|
Dry to Drop (sec.) |
120 |
116 |
113 |
110 |
FILM SIZES:
- 4" sq. (10cm x 10cm) up to 14" (35cm) wide by any standard length
TANK CAPACITIES:
- 2.0 gal (7.5 lit) each developer, fixer, water
WEIGHT:
- 200 lbs.(91 kg) with fluid
SITE REQUIREMENTS
ELECTRICAL:
- 115V/12A 50/60 Hz or 230V/6A 50/60 Hz
WATER:
-
Temperature: 50° - 90T (10°-32"G)
- Pressure: 40-l00psi (3-7 bar)
- Flowrate: .5gal/min (1.9 lit/min)
- Valve: Dedicated on/off hose cock with 3/4" male garden hose fitting
DRAIN:
-
Capacity: 3 gal/min (11.4 lit/min)
- Material: Must be corrosion-resistant material i.e. plastic or cast iron
- Route drain hoses through front or rear of processor
ROOMTEMP:
- Temperature = 59° - 86°F (15° - 30°C)
- Relative Humidity = 15- 76%
AIR & HEAT:
- Standby = 250 BTU/hr (75 W)
- Moderate use = 1700 BTU/hr (500 W)
- Recommended ventilation rate = 10 air changes/hour
WARRANTY:
- 12 month limited on all parts
|
|
